Electric Heaters

Coil Spring Heaters

Type Spring Coil Heaters
Model Number YM-SCH-01
Material SUS304,321,MgO
Max Temperature Operating 750ºC
Resistance Wire Cr20Ni80
Length Tolerance 5%
Resistance Tolerance
+/- 10% (+/- 5% Available Upon Request)
Wattage Tolerance +/- 10% (+/- 5% Available Upon Request)
Internal Thermocouple Type J,K or E; Power Density 20w/cm square
Wire Lead High temperature Teflon lead wire and stainless steel shield provided.
Voltage/Power Inner Diameter/Length/Cross Section 230v/350w 19mm/40mm/2.2x4.2mm 230v/350w 19mm/40mm/3.0x3.0mm 230v/1200w 50mm/100mm/3.5x3.5mm 230v/2000w 50mm/260mm/4.2x8.5mm 230v/600w 20mm/110mm/4.0x4.0mm
Packaging Details Carton and Wooden Case.
Delivery Detail 7-30days, Depends on the quantity.
QC 100% QC inspection Before Shippment.

Coil Spring Heaters

Type Spring Coil Heaters
Model Number YM-SCH-02
Material SUS304,321,MgO
Max Temperature Operating 750ºC
Resistance Wire Cr20Ni80
Length Tolerance 5%
Resistance Tolerance
+/- 10% (+/- 5% Available Upon Request)
Wattage Tolerance +/- 10% (+/- 5% Available Upon Request)
Internal Thermocouple Type J,K or E; Power Density 20w/cm square
Wire Lead High temperature Teflon lead wire and stainless steel shield provided.
Voltage/Power Inner Diameter/Length/Cross Section 230v/350w 19mm/40mm/2.2x4.2mm 230v/350w 19mm/40mm/3.0x3.0mm 230v/1200w 50mm/100mm/3.5x3.5mm 230v/2000w 50mm/260mm/4.2x8.5mm 230v/600w 20mm/110mm/4.0x4.0mm
Packaging Details Carton and Wooden Case.
Delivery Detail 7-30days, Depends on the quantity.
QC 100% QC inspection Before Shippment.

Cartridge Tubular Heaters

Type Cartridge Tubular Heaters
Model Number YM-CTH-01
Material SUS304,316,321, Incoloy800, 804, 600
Diameter Φ3-30mm
Diameter of Tolerance
-0.02 a -0.06 m/m
Maximum Operating Temperature 870ºC(1600°F)
Heat Density Not Exceeding 30W/cm2
Wattage Tolerance +5% -10% Voltage Supply 12V~440V
Resistance Wire Element NiCr or FeCr
Insulation Material High Purity MgO Length Tolerance ±2% or 3.2mm (1/8”), whichever is greater
Insulation Resistance (cold)≥ 5mΩ Maximum Leakage Current <0.5mA Escape of Current(cold) <=0.1mA a 242V
Cold Areas Depends on Length and Diameter 5~25mm.
Internal thermocouple Type J or K Thermocouple Location Disc End, Sheath, Center of Heater
Dielectric Strength 1500V.1/seg Types of Leads Connection Crimped or Swaged leads
Options of Lead Wire Standard Fiberglass Wire (Heat-resistance of 1 ~ 300℃ ),High-temperature FiberglassWire (Heat-resistance of 500 ~1000℃ ), Teflon Wire, Silicone Wire
Packaging Details: Carton and Wooden case.
Delivery Detail: 7-30days, depends on the quantity.
Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shippment.

Cartridge Tubular Heaters

Type Cartridge Tubular Heaters
Model Number YM-CTH-01
Material SUS304,316,321, Incoloy800, 804, 600
Diameter Φ3-30mm
Diameter of Tolerance
-0.02 a -0.06 m/m
Maximum Operating Temperature 870ºC(1600°F)
Heat Density Not Exceeding 30W/cm2
Wattage Tolerance +5% -10% Voltage Supply 12V~440V
Resistance Wire Element NiCr or FeCr
Insulation Material High Purity MgO Length Tolerance ±2% or 3.2mm (1/8”), whichever is greater
Insulation Resistance (cold)≥ 5mΩ Maximum Leakage Current <0.5mA Escape of Current(cold) <=0.1mA a 242V
Cold Areas Depends on Length and Diameter 5~25mm.
Internal thermocouple Type J or K Thermocouple Location Disc End, Sheath, Center of Heater
Dielectric Strength 1500V.1/seg Types of Leads Connection Crimped or Swaged leads
Options of Lead Wire Standard Fiberglass Wire (Heat-resistance of 1 ~ 300℃ ),High-temperature FiberglassWire (Heat-resistance of 500 ~1000℃ ), Teflon Wire, Silicone Wire
Packaging Details: Carton and Wooden case.
Delivery Detail: 7-30days, depends on the quantity.
Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shippment.

Stripe Hearters

Features:
Stainless steel is used Cr20Ni80 mica heater for heating system in the body around prefabricated good insulator on the mica. Stainless steel skin and metal, tin or Tongpi produced by the thermal conductivity of. Circle plate can be made and other heterosexual products.
Applicantions: Plastic processing machinery. injection and blow moulding. extruders. hot runner bushings.

Tubular Heaters

Type Double Ended Tubular Heaters
Model Number YM-DTH-01
Material SUS304,316,321, Incoloy800, 804
Diameter Φ4mm~30mm.
Diameter Tolerance Φ0.02mm to 0.06mm
Maximum Operating Temperature 750ºC(1382°F)
Heat Density Not Exceeding 30w/cm2
Power Depends on the dimension Wattage Tolerance +5% -10% Voltage Supply 12V~440V
Resistance Wire Element 0Cr25Al5,Cr20Ni80
Insulation Material High Purity MgO
Insulation (cold) 5 Min Ohms 500 Watts minimum
Cut off connection tolerance +/-15 mm Insulation Resistance (cold) 20mΩ
Maximum Leakage Current <0.75mA Escape of Current(cold) <=0.1mA a 242V
Length Tolerance +/-1.5%
Cold Areas Depends on Length and Diameter 5~25mm. Dielectric Strength 1500V.1/seg Lead Connection Option Crimped or Swaged leads
Lead wire type 10" Standard (Teflon/silicone high temperature fiberglass)
Packaging Details Carton and Wooden case.
Delivery Detail 7-30days, depends on the quantity. Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shipment.


Tubular Heaters

Type Double Ended Tubular Heaters
Model Number YM-DTH-01
Material SUS304,316,321, Incoloy800, 804
Diameter Φ4mm~30mm.
Diameter Tolerance Φ0.02mm to 0.06mm
Maximum Operating Temperature 750ºC(1382°F)
Heat Density Not Exceeding 30w/cm2
Power Depends on the dimension Wattage Tolerance +5% -10% Voltage Supply 12V~440V
Resistance Wire Element 0Cr25Al5,Cr20Ni80
Insulation Material High Purity MgO
Insulation (cold) 5 Min Ohms 500 Watts minimum
Cut off connection tolerance +/-15 mm Insulation Resistance (cold) 20mΩ
Maximum Leakage Current <0.75mA Escape of Current(cold) <=0.1mA a 242V
Length Tolerance +/-1.5%
Cold Areas Depends on Length and Diameter 5~25mm. Dielectric Strength 1500V.1/seg Lead Connection Option Crimped or Swaged leads
Lead wire type 10" Standard (Teflon/silicone high temperature fiberglass)
Packaging Details Carton and Wooden case.
Delivery Detail 7-30days, depends on the quantity. Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shipment.

Mica Band Heaters

Type Mica Band Heaters
Model Number YM-MH-15
Wattage Densities Maximum 10watts/sq.cm
Voltage Range 12volts to 600volts AC/DC 1 or 3 phase Min.Dimension(ID*height) 25*25mm
Heating Wire Cr20Ni80
Insulation Material Mica Sheath Stainless steel Part Temperatures 0~760 ºC
Wattage Tolerance +5% -10% Resistance Tolerance +10% -5% Packaging Details Carton and Wooden Case.
Delivery Detail 7-30days, Depends on the quantity.
QC 100% QC inspection Before Shipment.

Finned Tubular Heaters

Type Finned Tubular Heaters
Model Number YM-FCTH-15
Material SUS304,316,321, Incoloy800, 804
Diameter Φ4mm,30mm
Diameter Tolerance -0.02 to -0.06 mm
Maximum Operating Temperature 750ºC(1382°F)
Heat Density Not Exceeding 30w/cm2
Power Depends on the dimension Operation voltage 380V,240V, 220V,110V,36V,24V or 12V
Wattage Tolerance +5% -10% Resistance tolerance +10%, -5%
Cut off connection tolerance +/-15 mm
Length tolerance +/-1.5%
Insulation (cold) 5 Min Ohms 500 Watts minimum
Lead Connection Option Crimped or Swaged leads
Lead wire type 10"Standard (Teflon/silicone high temperature fiberglass)
Resistance Wire Element Ni-Cr or Fe-Cr-Al Insulation Material High Purity MgO
Packaging Details Carton and Wooden case.
Delivery Detail 7-30days, depends on the quantity.
Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shippment.
Packaging Details Carton and Wooden case.

Quartz Infrared Heaters

Type Infrared Heating Quartz Lamp Model Number YM-HQL-15
Material Filament Carbon fiber, Tube quartz tube
Wave Length 1.3-2.0um
Voltage 100, 110, 120, 220, 230, 240V Wattage 50-2500W
Length 200-2000mm
HZ 50-60 HZ
Diameter of Tube 10mm-20mm
Electricity Saving Ratio 30%
Infrared Normal Direction Radiant Ratio ≥94%
Electric Heat Transformation Ratio ≥98%
Operating Temperature ≤1800 Celsius degree
Highest Heat Temperature Endured 1100 Celsius degree
Color Temperature 900-1500 Celsius degree
Packaging Details Carton and Wooden Case.
Delivery Detail 7-30days, Depends on the quantity.
QC 100% QC inspection Before Shipment.

Quartz Infrared Heaters

Type Infrared Heating Quartz Lamp Model Number YM-HQL-15
Material Filament Carbon fiber, Tube quartz tube
Wave Length 1.3-2.0um
Voltage 100, 110, 120, 220, 230, 240V Wattage 50-2500W
Length 200-2000mm
HZ 50-60 HZ
Diameter of Tube 10mm-20mm
Electricity Saving Ratio 30%
Infrared Normal Direction Radiant Ratio ≥94%
Electric Heat Transformation Ratio ≥98%
Operating Temperature ≤1800 Celsius degree
Highest Heat Temperature Endured 1100 Celsius degree
Color Temperature 900-1500 Celsius degree
Packaging Details Carton and Wooden Case.
Delivery Detail 7-30days, Depends on the quantity.
QC 100% QC inspection Before Shipment.

Finned Tubular Heaters

Type Finned Tubular Heaters
Model Number YM-FCTH-15
Material SUS304,316,321, Incoloy800, 804
Diameter Φ4mm,30mm
Diameter Tolerance -0.02 to -0.06 mm
Maximum Operating Temperature 750ºC(1382°F)
Heat Density Not Exceeding 30w/cm2
Power Depends on the dimension Operation voltage 380V,240V, 220V,110V,36V,24V or 12V
Wattage Tolerance +5% -10% Resistance tolerance +10%, -5%
Cut off connection tolerance +/-15 mm
Length tolerance +/-1.5%
Insulation (cold) 5 Min Ohms 500 Watts minimum
Lead Connection Option Crimped or Swaged leads
Lead wire type 10"Standard (Teflon/silicone high temperature fiberglass)
Resistance Wire Element Ni-Cr or Fe-Cr-Al Insulation Material High Purity MgO
Packaging Details Carton and Wooden case.
Delivery Detail 7-30days, depends on the quantity.
Warranty 3000 working hours or at least one year
QC 100% QC inspection Before Shippment.
Packaging Details Carton and Wooden case.